Application of the self-glazed zirconia crown for Bicon implant restoration at limited interocclusal space
-
摘要:
目的 探讨数字化釉锆全瓷冠在低(牙合)龈距离Bicon种植修复中的应用。 方法 42例(牙合)龈距离不足的牙列缺损的患者植入55颗Bicon种植体,根据所选基台进行数字化设计制作釉锆全瓷冠,体外进行基台牙冠的粘接,形成一体化基台冠,完成固定式种植义齿修复,并对修复体进行1~30月的回访。 结果 55颗种植体存活率为98.18%,修复体返工率为0%,最长达30个月的观察期内未发生崩瓷及冠脱落。 结论 数字化釉锆冠能够解决咬合空间不足所引起的Bicon种植后期修复问题,同时其强度大,密合度高,具有较好的功能及美学效果,为(牙合)龈距离不足的种植患者提供新的修复方法。 Abstract:Objective To explore the application of self-glazed zirconia crowns to restore Bicon implant in limited interocclusal spaces. Methods 55 bicon implants were implanted in 42 patients with limited interocclusal space in edentulous area and the digital design and manufacture was used to fabricate self-glazed zirconia crown according to the selected abutment. The abutment and the crown were bonded together to form an integrated base crown to restore the edentulous area. The follow-up period is up to 1-30 months. Results the survival rate of the 55 implants was 98.18%, and the reworking rate of the prosthesis was 0%. No porcelain collapse or crown shedding occurred during the observation period of up to 30 months. Conclusion The self-glazed zirconia crown fabricated by CAD has been successfully used in Bicon implants with limited interocclusal space. The self-glazed zirconia crowns showed excellent aesthetic effects, marginal adaptation, sufficient mechanical strength and occlusal functions, providing a new strategy for restoring implant with limited interocclusal space. -
Key words:
- digital design /
- self-glazed zirconia /
- limited interocclusal space /
- implant restoration
-
表 1 戴牙当日和30月随访内临床观测指标结果
观测指标 时间 结果 备注 种植体
存活率1~30月 98.18% 1例上颌窦内提后3个月发生种植体脱落 修复体
返工率当天 0% 修复当天未发生邻接丧失 修复体
并发症1~30月 2.2±0.1 未发生修复体 崩瓷及裂瓷 -
[1] 李明华, 刘晓秋, 孙宏晨, 等. 氧化锆陶瓷在口腔医学中的应用[J]. 吉林大学学报(医学版), 2006, 32(6): 1146-8 [2] Bonfante EA, Suzuki M, Lorenzoni FC, et al. Probability of survival of implant-supported metal ceramic and CAD/CAM resin nanoceramic crowns[J]. Dent Mater, 2015, 31(8): e168-77 doi: 10.1016/j.dental.2015.05.006 [3] 赵信义. 口腔材料学[M]. 北京: 人民卫生出版社, 2012: 192-202. [4] El-Dessouky RA, Salama MM, Shakal MA, et al. Marginal adaptation of CAD/CAM zirconia-based crown during fabrication steps[J]. Tanta Dent J, 2015, 12(2): 81-8 doi: 10.1016/j.tdj.2014.12.002 [5] 钟 雷, 王林虎, 等. (牙合)龈距离过低的老年患者种植牙数字化修复[J]. 临床口腔医学杂志, 2014, 30(05): 289-91 doi: 10.3969/j.issn.1003-1634.2014.05.011 [6] 李少冰, 张雪洋, 等. 后牙区单牙缺失行骨水平种植体联合一体化基台冠修复的临床效果评估[J]. 临床医学工程, 2014, 21(07): 840-1 doi: 10.3969/j.issn.1674-4659.2014.07.0840 [7] 韦启升, 陆丽萍, 等. 数字一体化基台冠在颌龈距离过低的种植牙修复中的应用[J]. 海南医学, 2017, 28(19): 3238-9 doi: 10.3969/j.issn.1003-6350.2017.19.049 [8] 李 勇. Procera CAD-CAM系统制作种植体一体化全瓷基台冠[J]. 口腔医学研究, 2012, 28(10): 1076-7 [9] Nejatidanesh F, Amjadi M, Akouchekian M, et al. Clinical performance of CEREC AC Bluecam conservative ceramic restorations after five years—A retrospective study[J]. J Dent, 2015, 43(9): 1076-82 doi: 10.1016/j.jdent.2015.07.006 [10] Wang L, Liu Y, Si W, et al. Friction and wear behaviors of dental ceramics against natural tooth enamel[J]. J Eur Ceram Soc, 2012, 32(11): 2599-606 doi: 10.1016/j.jeurceramsoc.2012.03.021 [11] Porojan L, Topală F, Savencu C. Influence of the Veneering Thickness on Stresses in All-Ceramic Crowns[J]. J Appl Biomater Biom, 2016, 835(1): 91-6 [12] Chong BJ, Thangavel AK, Rolton SB, et al. Clinical and laboratory surface finishing procedures for zirconia on opposing human enamel wear: a laboratory study[J]. Mech Behav Biomed, 2015, 50(2): 93-103 [13] 寇国明, 佟 岱, 等. Bicon种植体用一体化基台冠制作的常见问题及处理[J]. 口腔颌面修复学杂志, 2012, 13(01): 34-5 doi: 10.3969/j.issn.1009-3761.2012.01.009 [14] 李雅娟, 陈树国, 孟令强, 等. 种植义齿龈(牙合)距离过短及种植义齿折断后的修复治疗[J]. 现代口腔医学杂志, 2006, 21(05): 556-9 doi: 10.3969/j.issn.1003-7632.2006.05.043 [15] Liu Y, Wang Y, Wang D, et al. Self-glazed zirconia reducing the wear to tooth enamel[J]. J Eur Ceram Soc, 2016, 36(12): 2889-94 doi: 10.1016/j.jeurceramsoc.2015.11.029 [16] Liu C, Xiang M, Fu Z, et al. Microstructural refinement in spark plasma sintering 3Y-TZP nanoceramics[J]. J Eur Ceram Soc, 2016, 36(10): 2565-71 doi: 10.1016/j.jeurceramsoc.2016.03.019 [17] Chen DL. A clinical analysis of screw-retained implant-supported casted integrated abutment crowns in the molar region with limited interocclusal space[J]. Shanghai J Stomatol, 2017, 26(4): 419-24 [18] Urdaneta RA, Marincola M. The Integrated Abutment Crownt, a screwless and cementless restoration for single-tooth implants: a report on a new technique[J]. J Prosthodont, 2007, 16(4): 311-8 doi: 10.1111/jopr.2007.16.issue-4 [19] Sheridan RR, Verrett R. Effect of Split-File Digital Workflow on Crown Margin Adaptation[J]. J Prosthodont., 2017, 26(7): 571-80 doi: 10.1111/jopr.2017.26.issue-7 [20] Yi YS, Emanuel KM, Chuang SK. Short (5.0 × 5.0 mm) implant placements and restoration with integrated abutment crowns[J]. Implant Dent, 2011, 20(2): 125-30 doi: 10.1097/ID.0b013e31820fb67e [21] Donohoe DF, Morgan VJ. One-stage placement of a 6.0 x 5.7 mm short implant and its restoration with an IntegratedAbutment Crown[J]. J South Afric Dent Associat, 2008, 63(5): 314, 316-7 [22] 区韵婵, 温 灵, 刘宇明, 等. 可铸造基台在颌龈距离不足种植病例中的临床应用观察[J]. 白求恩医学杂志, 2016, 14(01): 53-4